How to Get Water Out of Android Phone Speakers

No smartphone does not likes being dropped in water or being caught in rain. A lot of Android phones nowadays are water-resistant, but when water enters the speakers, you may have trouble. The sound could go muffled or even distorted, or too soft. When the phone has already dried out, in some cases, there may still be a strange sound in the speaker due to the presence of water drops in the speaker grill.

The good news is that in most cases, you can safely remove water from your Android phone speakers at home. This guide covers why it happens, how to get rid of the water step by step, what not to do, and how to protect your phone in the future.

Why Does Water Get Stuck in Android Phone Speakers?

The openings of phone speakers are too small. They pass through sound waves. When the interior of it is filled with water, that seals the holes and superimposes the thin skin on the membrane. This has four implications:

• Sound: The damping effect of the water mutes the voice of the speaker.
• Distorted audio: Entangled splashes cause the sound to be garbled.
• Low volume: Water prevents air flow to enable loudness.
• Crackling: The electric current is impeded by moisture.

Your Android phone, despite being rated with IP67or IP68, which offers protection against spills or even immersion, may get water remaining in the speaker holes.

Signs That Water is in Your Speaker

• There is fuzziness/crackling speaker sound.
• Audio is quite low or hushed.
• One can see water drops in the speaker grill.
• There is an in-and-out sound that comes at random.
• You play audio and hear gurgling/distorted sound.

In case you see these symptoms immediately after your phone gets wet, then has a good chance of there being water lodged in the speaker.

Tools You May Need

These are some of the harmless instruments to clean your ears:

• Wipe with a microfiber cloth to remove the dirt.
• Dab with a cotton swab. Make sure you do not stuff the swab in.
• Gently get rid of wax with a quick brush.
• The water eject apps are those applications that can spray water into the ear canal to remove earwax.
• Moisture can be absorbed by silica gel packets, and keep your ears dry.

Step-by-Step Methods to Get Water Out

And here are the best and safest methods of draining water out of Android phone speakers:

1. Shake The Water Out

• Grip your phone.
• Pitch speaker down.
• Shake lightly so it motivates water droplets to leave.
• Clean with a microfiber towel.

Avoid: Don’t shake too hard, as it may cause more liquid to spread inside.

2. Use a Speaker Cleaner App (Sound Method)

Free applications and websites can also be downloaded that resonate special frequencies to dislodge the water in the speaker through vibration.

• Search for Speaker Cleaner or Fix My Speaker app and apply.
• Have the water eject playing through the speaker or stereo for 30-60 seconds.
• Have your phone down when it is in operation.
• Repeat 2-3 times, when necessary.

It surprisingly works very well and particularly when there is little water trapped.

3. Use Absorbent Materials

• Put a dry surface on your phone.
• Keep it in silica gel packs ( those little packets that come with shoe boxes).
• It should be left for at least 12-24 hours.

Silica gel absorbs moisture better than rice and reduces the risk of residue.

4. Let It Air Dry

In some cases, it is patience that needs to be fixed.

• Store the phone in an airy, warm, and dry location.
• Put it next to (but not under) a fan, or the actual sunlight.
• Lay it up for a few hours.

Avoid using it in an oven, in a heater, or in a hair dryer, as excess heat may damage the phone.

5. Use a Soft Cloth or Cotton Swab

If you see water droplets sitting on the grill:

• Wipe using a flake cloth.
• Or with a dry cotton swab.
• Do not wipe it, dab it.
• Repeat.
• On the bulk of the phone, use a microfiber cloth.
• Use a dry cotton swab in the corners.
• Please do not put too hard, or you will introduce water.

6. Rice Method (Last Resort)

In case the water droplets do not evaporate, the rice technique will be your ultimate option.

• Put the phone in a container of uncooked rice.
• Let it settle for 12-24 hours.
• The rice helps keep moisture, but it can leave residues of dust particles; therefore not as efficient as silica gel.

What NOT to Do

• Don’t blow into the speaker: It can push the water further into the speaker.
• Do not subject to a hair dryer: Heat can damage internal parts by warping.
• Not bashful about sharp things: Can cut the grill or membrane.
• However, Do Not Plug Directly in: Water + Electricity=Fire Hazard

When to Seek Professional Help

If, after drying, your Android speaker still has a muffled sound, it could be,

• Water has flooded internal circuits.
• Corrosion is underway.
• The speaker membrane is busted.

If you do that, then go to an authorized service center or a trusted repair shop.

Tips to Prevent Future Damage

• Fit your phone in a waterproof cover to keep it more safe.
• Never take your phone into the rain or the showers, regardless of whether the phone is water-resistant, since they still have limits.
• Dust off the speakers by either using a soft cloth to dust or even a toothpick. Dust also increases its risk to water to the speakers.
• Maintain silica gel at home to absorb the moisture as a result of spillage.

Frequently Asked Questions

Final Thoughts

The water in your Android phone speaker might seem terrifying, but mostly it is not permanent. You are usually supposed to repair it yourself and take safe measures such as shaking gently, using a speaker-cleaning app, drying with silica gel, or simply airing it out.

Avoid risky ways like blow-drying, using sharp materials, and premature charging. When sound has not returned to normal, go to a professional repair because it could cause long-term damage.

Your Android phone speaker may be used to its full potential by getting proper treatment once you experience a water calamity.