Cheap DIY Fixes for Water-Damaged Phones

Cheap DIY Fixes for Water-Damaged Phones

By

One of the most popular and annoying issues smartphone users have to encounter is water damage. Be it that your phone accidentally fell in the water or was splashed, sometimes being able to act quickly and efficiently can save your phone without spending money on the repair. Here, you will have some inexpensive and simple diy repairs to correct water damage and mobile phones and water damage in the future.

Symptoms To Speak to a Water-Damaged Phone

Be sure you have these common signs of water damage in your phone before you begin any repair:

  • Touch doesn’t respond, or flickering screens.
  • The phone has no turning on and off switch.
  • Mic and/or deteriorated / garbled audio quality.
  • Charging problems.
  • Presence of liquid, or water drops, in the phone or under the screen.
  • Rust on the buttons that are visible or the charging port, around the corrosion.

In case you see any of them, there is probably a water damage issue in your phone, and you should pay attention quickly.

Step 1: Turn Off Your Phone Immediately

In case your phone was wet, the main and the first step is to switch it off immediately. It could become short of the internal components. Should the phone be switched off, it should not be attempted to be turned on until fully dried.

Step 2: Remove Accessories and SIM Card

  • Take off covers, screen protectors, and appendages.
  • Pull memory (where feasible) as well as the SIM card.
  • In case you have a phone with a removable battery, remove it.

These sections can trap moisture, and therefore the removal of these dries them quicker.

Step 3: Pass from Outside

Dry that water on the surface of your phone and its openings and ports using a mild sackcloth or microfiber towel. Never shake the phone, as it may propagate water inside the phone.

Step 4: Use Absorbent Materials to Dry the Phone

Two diet options from a diet for a regular DIY Drying situation.

a. Silica Gel (The Top one)

Silica gel packets are commonly used in the packaging of new products, such as shoe boxes or electronic merchandise, because they absorb moisture well.

  • Then put the phone in a ziplock or any kind of airtight package with some packets of silica gel.
  • WAIT TILL 24, 48 hrs Or MORE.

b. Use Uncooked Rice (Common Home Remedy)

Put the phone in a bag or bowl of uncooked rice so that it is completely immersed.

  • Rice is also effective, although not as effective as silica gel.
  • Allow to sit on the same 24-48hrs.

Note: Rice particles may find their way to ports; therefore, handle with caution.

Step 5: Use a Vacuum Cleaner or Compressed Air (Optional)

Another variant of an optional Step 5 will be Vacuum Cleaner or Compressed Air ( Vacuum Cleaner or Compressed Air). To assist in drying out the moisture that is trapped inside ports and speakers, you may:

  • Put your handheld vacuum cleaner (experiment with putting it on low suction) as near the ports as possible.
  • Short blasts can be used with canned compressed air.
  • It should be noted that any internal parts can be damaged by a hair dryer or direct heat.

Step 6: Test Your Phone After Drying

Under such a circumstance as 24-48 hours drying agent:

  • Reinsert the battery, SIM, and the memory card.
  • Switch ON the equipment.
  • Just in case it comes on and functions correctly, terrific! Problems may require professional repair in case of they continue.

Step 7: Prevent Future Water Damage (DIY Tips)

1. Use Waterproof Cases or Pouches

Wear waterproof attire and/or waterproof wear cases or bags. Get a cheap waterproof phone cover or slip case in case you are close to water regularly.

2. Avoid Using Your Phone in Wet Conditions

Never forget to keep your phone out of the way where there is water. Avoid pools, sinks, and rain as much as you can concerning your phone.

3. Seal Ports When Not in Use

Wrap charging ports, headphone ports in small port covers or plugs. Such issues as speaker problems and screen problems are common.

4. Apply a DIY Waterproof Coating (Advanced)

Advanced do-it-yourself (DIY) waterproofing one. Others use a waterproof nano spray or liquid screen protector in a thin coat form. Research carefully.

When to turn to a Professional? What Circumstances

In case your phone:

  • When it dries, it fails to turn on.
  • Have that phone switched off now.
  • Are there movable ports that are corroded, such that they are visible?

It is advisable that it should be serviced professionally. You can easily make it worse by trying to make some repairs on your own that exceed drying it.

Summary

Phone damage in water can be frightening, however usually easy to repair using simple, low-cost DIY measures:

  • Without heat, driven, shaking.
  • Take off the pieces (SIM, battery, and accessories).
  • A desiccant of dry silica-gel or rice, no heat, fuming.
  • Cases and covers will avoid this damage

These tips will save you money and prolong the life of your phone.