water eject sound real or fake featured image by speaker cleaner

I Tested Water Eject Sounds — Do They Actually Work or Is Everyone Being Tricked?

By

Have you ever dropped your phone in water or got caught in the rain, and suddenly your speaker started sounding weird—muffled, crackly, or almost like it was underwater from the inside?

That’s exactly when people search for “Water Eject Sound” or “Speaker Water Removal Sound” — and honestly, you’ll see thousands of tools and apps claiming to “blast” water out of the speakers in seconds.

But the real question is:

Does it actually work… or is the whole thing just a fancy gimmick?

Alright, let’s break this down — no hype, no shortcuts, and no false promises. Just clear, practical info you can trust.

What is a “Water Eject Sound”?

A Water Eject Sound is basically a low-frequency sound wave (usually around 150–200Hz). When your phone plays that sound at high volume:

  • The speaker vibrates aggressively.
  • The air pressure inside the speaker increases.
  • That pressure pushes water droplets outward.
  • Gravity helps those droplets fall out of the speaker grill.

Think of it like shaking a wet paintbrush—except instead of your hand, the phone uses sound vibrations to shake the water out. That’s the whole science.

So… Does It Actually Work?

Yes — BUT only in certain situations.

Water eject sound does work, but not like magic, and not in every case. If your speaker is muffled because a thin layer of water is trapped inside the mesh or right behind the speaker grill, this method usually works extremely well.

Many users — and even some tech reviewers — have shown:

  • Water droplets are visibly coming out
  • Sound becoming clearer
  • Muffled or distorted audio improves instantly

But it’s not a miracle cure.

Where Water Eject Sound Works Perfectly

This method works best when:

1. Water entered the speaker grill only

A splash, rain, shower, sweat, etc.

2. The speaker sounds muffled or low

Because water is literally sitting on the speaker membrane.

3. No serious internal damage

The phone didn’t take a long dive, and no ports are flooded.

4. Water is fresh (non-salt, non-sugary)

Saltwater, pool water, or soda can leave residues that sound waves cannot remove.

5. You use the right frequency (around 165Hz)

This frequency is known to push water droplets outward effectively.

If your situation matches the above, then yes, water-eject sound can genuinely save your speakers within seconds.

Where Water Eject Sound Does NOT Work

This is where the internet doesn’t tell you the full truth. Water eject sound does not magically fix:

1. Deep internal water damage

If water has seeped under the motherboard or inside the internal chambers, no sound can reach there.

2. Sticky liquids (juices, tea, soda, etc.)

Sound vibrations can’t break sticky residue. You will still have muffled audio.

3. Water is stuck inside the charging port

Different path, different mechanism.

4. Saltwater deposits

Salt causes corrosion — sound cannot remove corrosion.

5. Full submersion for long durations

If the phone was underwater for more than a few minutes, the speaker cleaning sound alone is NOT enough.

Is It Just a Gimmick?

Honestly speaking:

  • No, it’s not a gimmick.
  • But it IS overrated by many apps.

Water eject sound is a real technique, used by:

  • Apple Watch
  • Samsung phones
  • Smartwatches
  • Bluetooth devices

Many modern electronics use this exact method to shake water out.

The problem is:

  • Random apps and websites overhype it like a miracle cure.

The reality:

  • Helpful? Yes
  • Useful? Yes
  • Does it work for many people? Yes
  • 100% guaranteed? No
  • Fixes everything? Definitely not

So it’s a tool, not a solution to every type of water damage.

How to Properly Use a Water Eject Sound (My Personally Tested Method)

If you want the best results, follow this exact step-by-step method:

1. Remove case + wipe the phone

No point vibrating water if it has nowhere to escape.

2. Put the phone speaker facing downward

Gravity helps.

3. Turn volume to 100%

Low-frequency waves need full power.

4. Play the water-eject sound for 20–30 seconds

5. Wipe any water that comes out

You’ll often see tiny droplets.

6. Repeat 2–3 times if the sound is still muffled

7. Let the phone air-dry naturally for a few hours

This step is crucial. Even after ejecting water, micro-moisture remains.

What You Should Never Do

Let me save your phone from common mistakes:

1. Do NOT use a hairdryer

It forces moisture deeper and damages seals.

2. Do NOT put your phone in rice

Rice does nothing for water inside speakers and can create dust.

3. Do NOT shake the phone aggressively

You can break internal flex cables.

4. Do NOT charge the phone while wet

This is the biggest reason phones get fried.

How to Know If Water Is Still Inside

Signs that moisture is still inside:

  • speaker crackles at high volume
  • The bass is weak
  • The phone vibrates oddly at a loud volume
  • The phone takes too long to dry
  • The charging port shows “moisture warning”
  • mic sounds muffled during calls

If any of these are still happening, the water eject sound-only solution only solved part of the problem.

Final Verdict: My Honest Opinion

If you want my completely straightforward answer:

  • Water Eject Sound is real.
  • It works.
  • And it can save your speaker.
  • But it’s NOT a magic solution.

Use it immediately for:

  • muffled sound
  • small water splashes
  • rain exposure
  • shower moisture

But don’t rely on it for:

  • deep water damage
  • saltwater
  • sugary liquids
  • long submersion

Think of it as a quick rescue, not a complete repair.